Turning surveillance onto IP

Bullet CamNotoriously conservative and resistant to change, video surveillance installers continue to cling to old style analogue products rather than embrace IP. Which is strange as IP surveillance solutions can be as good, if not better, when it comes to video quality and far superior when it comes to support for things like remote access and video analytics. But, if it’s so much better, then why are installers still opting for analogue?

It’s clearly not the capabilities of the technology at fault. Rather it seems to be a general perception that, whereas analogue cameras simply plug in and work, getting an IP surveillance system to do the same ca

Not only are our cameras easier than ever to install, we’ve paid particular attention to how they communicate with our back-end recorders. As a result we recently added a completely new network video recorder to the D-Link line-up called JustConnect, designed to make installing and using an IP-based surveillance system as easy as analogue – if not easier.n be a lot more complicated, A perception that may have been true in the early days, but one which no longer applies. Especially to the latest generation of IP surveillance products from D-Link.

JustConnectTo start with, the JustConnect hardware looks uncannily like the kind of video recorder you get with a traditional analogue CCTV system, with manual controls at the front and everything else tucked away round at the back. That includes a built-in 8-port switch for camera attachment, which is important as it addresses one common complaint when it comes to IP surveillance – the need for extra network hardware to join cameras and recorders together.

With JustConnect, the network switch is built-in and guaranteed to work. It even supports Power over Ethernet (PoE), which means being able to send power to the cameras over the same cable used to carry the video, rather than have to provide this separately, as with an analogue installation. That alone can be major advantage, especially when installing cameras in remote or inaccessible locations with no AC outlets nearby.

You don’t need a PC to get JustConnect working either – another bugbear with installers. Simply plug in a monitor, or TV if you prefer, and either use the built-in controls or the remote to navigate through the on-screen menus, again, just like you would with an analogue system. Not that there’s much to do as, when a camera is attached, the JustConnect NVR will discover and add it automatically. Plus, once added, video output from the new camera will start to play in a window on the monitor straight away, confirming that it’s working and ready for use – just like analogue.

In terms of cameras, JustConnect can be used with D-Link business-class products with a choice of high resolution day and night cameras for both internal and external use, in a variety of formats, some with support for remote pan, tilt and zoom operations.

Simply plug any of these D-link cameras into the JustConnect network and they will “just work” – exactly like installing a camera on an analogue system. But that’s not all, on larger networks needing additional network switches, D-Link is one of only a handful of vendors able to supply customers with switches guaranteed to work with not only the JustConnect NVR but all of our other network video recorders, IP surveillance cameras and monitoring and management platforms.

We don’t just provide one or two of the components. D-Link really is an end-to-end solution company, able to deliver everything required to build a complete IP surveillance system to suit a wide variety of business needs. More than that, we guarantee that every single component will work with every other and – installers take note – be as easy to install as an old-style analogue surveillance system.


12 thoughts on “Turning surveillance onto IP

  1. Thanks for ones marvelous posting! I definitely enjoyed reading it, you’re a great author.I will make sure to bookmark your
    blog and will come back someday. I want to encourage you to ultimately continue your
    great job, have a nice morning!

  2. First off I want to say terrific blog! I had a quick question that I’d like to ask if you don’t mind.

    I was interested to know how you center yourself and clear your thoughts prior to writing.
    I have had a tough time clearing my mind in getting my thoughts out.
    I truly do take pleasure in writing however it just seems
    like the first 10 to 15 minutes are wasted simply just trying
    to figure out how to begin. Any ideas or tips? Kudos!

  3. I like the helpful information you supply on your articles.

    I will bookmark your blog and take a look at again right here regularly.
    I am reasonably sure I’ll be informed a lot of new stuff proper right here!

    Good luck for the next!

  4. Hey, I think your blog might be having browser compatibility issues.

    When I look at your blog site in Ie, it looks fine but when opening in Internet Explorer, it has some overlapping.
    I just wanted to give you a quick heads up! Other then that,
    awesome blog!

  5. Hi there very nice web site!! Man .. Excellent
    .. Superb .. I will bookmark your blog and take the feeds additionally?

    I’m satisfied to find a lot of useful info here in the publish, we’d like
    develop more strategies in this regard, thank you for sharing.
    . . . . .

  6. This article and many other on your site are very interesting.

    You should show your content to bigger audience. There is a big chance
    to go viral. You need initial boost and visitors will flood your page in no time.
    Simply search in google for:
    Juuri13 viral effect

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s